- Volume: High Production
- Ink Cost/Label: Extremely Low
- Finishing Speed: 9-18m/min
- Max Print Width: 215mm
- Max Roll Diameter: 43.94cm
- Cutting Method: Semi-rotary die (flexible steel)
Afinia Label DLP-2100 (Digital Label Press) -MB-ADLP21
R1 655 566 Incl VAT
DLP-2100 High-Volume Digital Label Press
The DLP-2100 can print, die cut, and finish labels at up to 60 feet per minute, making it the fastest and most advanced digital label press in its class. This full-featured workhorse is capable of laminating, die cutting, waste removal, slitting, and rewinding to finished rolls that are ready for application.
- To book a free demo contact us on sales@itpalacestore.co.za or to check availability.
Available on backorder
-
Print and finish labels inline
The DLP-2100 can print, die cut, and finish labels at up to 60 feet per minute. This full-featured workhorse is capable of laminating, die cutting, waste removal, slitting, and rewinding to finished rolls that are ready for application.
The label press is perfect for higher-volume label consumers as a way to bring label production in house to simplify inventory, reduce costs, and create flexibility. It’s best for situations involving repeat jobs and a small variety of predictable sizes.
Print shops are also using the DLP-2100 to offload short runs from larger, more expensive equipment or to add the capability to produce labels in-house—allowing for faster turnaround, better quality control, and more profitability on lower-volume label runs.
-
High-capacity finishing
The DLP-2100 is able to accommodate a massive roll of material (17.3 in/440 mm outside diameter), which drastically reduces stock cost from converters, and greatly simplifies operation by avoiding frequent roll changeovers.
A re-registering magnetic cylinder uses easily-swappable flexible steel dies that are low in cost and can be created quickly. These dies, combined with servo-controlled motors, allow for pinpoint cutting accuracy at high speeds, even with perforations. In addition to inline print applications, the DLP-2100 can be used to convert blank labels.
High output for large brands and print shops
With the L901 Digital Label Printer inline, the DLP-2100 can produce more than 25,000 full-color 3×4-inch labels per hour. For larger brands, this makes it ideal for bringing label production in house. Print shops can offload their smaller label runs, freeing up large format presses while reducing costs and setup times. Eliminating the need to outsource labels results in faster turnaround times, greater control and flexibility, and thousands of dollars saved.
The integrated L901’s print engine makes printhead maintenance possible with the web intact, allowing for uninterrupted production. In addition, it delivers industry-leading low ink costs via five (CMYKK) high-capacity cartridges.
Print Speed: | 30 ft/min. (9m) |
Print Quality: | 1600 DPI full-color output |
Max. Web Width: | 9.65″ (245 mm) |
Lateral Paper Adjustment: | 0.5″ (12 mm) |
Core Sizes: | 3″ (76 mm) |
Max. Laminate OD: | 11″ (280 mm) |
Laminate: | Economical, self-wound and supported laminate (on a liner). Liner removal included for use with high quality, liner-supported laminate |
Max. Diecutting Width: | 9″ (230 mm) |
Max. Diecutting Length: | 12″ (304.8 mm) |
Cutting Dies: | Flexible steel – Recommended total die length 7″ (177 mm) to 12″ (304.8 mm) |
Registration Sensor: | Laser |
Registration Sensor Adjustment: | 9″ (230 mm) x 12″ (304.8 mm) |
Sensor Mark: | 0.2″ x 0.2″ (5 mm x 5 mm) |
Max. Finished Label Rewind: | 11″ (280 mm) |
Max. Waste Matrix Rewind: | 11.8″ (300 mm) |
Razor Slitter Assembly: | 6 knives |
Razor Slitter Lateral Adjustment: | 0.47″ (12 mm) |
Media Capacity: | Print and finish (using L801 print engine’s enclosed unwinder): 6″ wide to 8.5″ wide, 8″ Max OD on a 3″ core. • Print and finish using optional external unwinder: Up to 19.68″ (500 mm) OD on a 3″ core |
Dimensions: | 92″ (233.7 cm) L x 59″ (149.9 cm) H x 30″ (76.2 cm) W |
Frame: | 0.4″ (10 mm) solid aluminum |
Safety Sensors: | Magnetic lid x 2 |
Loop: | Photoelectric distance sensor |
Power: | 110V – 240V adjustable, 7 Amps |
Speed: | Max 7.87″/sec (200 mm/sec) re-registering or 140 ft/min full rotary for blank labels |
Speed Control: | Variable |
Weight: | 420 lbs (190 kg) |
Motors: | 2, 400 W / 90 W |
Control: | PCB. Inverter, Encoder |
Reviews
There are no reviews yet.